FA-FSC-VH2, Heat Shrinkable Sealing Fiber Splice Joint Closure Vertical With 4 Fiber Tray
Fiber Optic Splice Closure , also called optical fiber joint closure, it is a protection product for the end of the local access cable, the access fiber optic cable come into the splice closure and then access optical switch through fiber optic jumper, it is able to prevent materials aging caused by hot, cold, light, oxygen and microbial in the nature, it is with excellent mechanical strength, firm shell and rigid body structure of the fiber optic splice closure is able to bear the worst environmental change, meanwhile it is flame retardant and waterproof, it is able to protect the fiber optic cable during shock, impact, stretch and twist.
It is suitable for straight through and branch connection of different fiber cables, such as overhead, pipeline, direct buried and other laying methods.
It play the role of protection and continuity for optical fiber cable, and the main body adopts reinforced plastic, which has the advantages of high strength, corrosion resistance, mature structure, reliable sealing and convenient for construction.
Key Characteristic
1, Temperature: -40 to +65℃;
2, Atmosphere: 100Kpa± 5kpa;
3, Sealing property at normal temperature: Internal pressure: 100Kpa± 5kpa , without decrease in 24 hours;
4, High temperature sealing property: internal pressure: 60Kpa± 5kpa, without decrease in 24 hours at 60℃;
5, Insulated resistance: ≥2×104MΩ;
6, Intensity: 15KV (DC) not being broken down, has no flying arc within 1 minutes;
7, Additional loss: No additional loss when optical fibers are winded in the splice trays;
8, Aging time of the enclosure material is longer than 20 years.
Main Components Of FA-FSC-VH2
| No. |
Name of components |
Quantity |
Usage |
Remarks |
| 1 |
FOSC cover |
1 piece |
Protecting fiber cable splices in whole |
Height x Diameter
355mm x 150mm
|
| 2 |
Fiber optic splice tray (FOST) |
Max. 6 trays (bunchy)
Max. 4 trays (ribbon)
|
Fixing heat shrinkable protective sleeve and holding fibers |
Suitable for: Bunchy:12,24(cores) Ribbon:6 (pieces) |
| 3 |
Fiber holding tray |
1 pcs |
Holding fibers with protective coat |
|
| 4 |
Base |
1set |
Fixing internal and external structure |
|
| 5 |
Plastic hoop |
1 set |
Fixing between FOSC cover and base |
|
| 6 |
Seal fitting |
1 piece |
Sealing between FOSC cover and base |
|
| 7 |
Pressure testing valve |
1 set |
After inject air, it is used for pressure testing and sealing testing |
Configuration as per requirement |
| 8 |
Earthing deriving device |
1 set |
Deriving metal parts of fiber cables in FOSC for earthing connection |
Configuration as per requirement |
Main Accessories And Special Tools
| No. |
Name of accessories |
Quantity |
Usage |
Remarks |
| 1 |
Heat shrinkable protective sleeve |
|
Protecting fiber splices |
Configuration as per capacity |
| 2 |
Nylon tie |
|
Fixing fiber with protective coat |
Configuration as per capacity |
| 3 |
Heat shrinkable fixing sleeve (single) |
|
Fixing and sealing single fiber cable |
Configuration as per requirement |
| 4 |
Heat shrinkable fixing sleeve (mass) |
|
Fixing and sealing mass of fiber cable |
Configuration as per requirement |
| 5 |
Branching clip |
|
Branching fiber cables |
Configuration as per requirement |
| 6 |
Earthing wire |
1 piece |
Putting through between earthing devices |
|
| 7 |
Desiccant |
1 bag |
Put into FOSC before sealing for desiccating air |
|
| 8 |
Labeling paper |
1 piece |
Labeling fibers |
|
| 9 |
Special wrench |
1 piece |
Tightening nut of reinforced core |
|
| 10 |
Metal hoop |
1 set |
For wall mounting and pole hugging |
|
| 11 |
Buffer tube
|
decided by customers |
Hitched to fibers and fixed with FOST, managing buffer. |
Configuration as per requirement |
| 12 |
Aluminum-foil paper |
1 piece |
Protect the bottom of FOSC |
|
Product Tags:
|
|
Heat Shrinkable Sealing Fiber Optic Joint Enclosure Vertical With 4 Fiber Tray Images
|
